YoYo BE5 Uživatelský manuál Strana 68
- Strana / 81
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
67
SAFETY RULES FOR LOAD SLINGING
Given the ever increasing use of hoisting equipment for handling materials, the issue of load slinging is becoming more and more
important.
The personnel members employed in such operations must be informed of the specific hazards to
which they are exposed or to which they may expose other workers.
Loads which can be connected directly to the hook of a hoisting machine are rare. Flexible means
such as chains, wire or textile ropes, are used in most cases. Particular attention must be paid to their
capacity, as ropes and chains used for slinging and hoisting loads are subject to neglect and to
service conditions which are a lot harder than those which hoisting machines are subject to.
Depending on the inclination of the sections the sling consists of, the force acting on each of them,
with a 1,000 Kg load, ranges from 500 Kg (vertical slings) to 1,932 Kg (150° inclination), as shown in
Picture 1.
Picture 1 – inclination of sling sections and acting forces.
Operation: LOAD HANDLING
LOAD
HOISTING
EQUIPMENT
If the weight of the load can not be equally divided among several slings, and it is necessary that a
single sling is fit to support the entire load, while the other slings shall grant stability to the load
(picture 2).
Picture 2 – Sling supporting the load and sling giving it stability
The slinging means (ropes, chains and straps) must be positioned at the bottom of the hook
saddle, never resting them on the tip, and no knots must be made to shorten them. Making hooks
work on the end tip is forbidden.
Please be reminded that if two ties cross on the same hook, one of them does is idle
and they will both wear in the point where they overlap (picture 3).
Picture 3 – Crossed ties
If the load is uneven or has corners and sharp edges which may damage ropes or chains, wood
or rubber distance blocks shall be interposed to
avoid damages.
(Picture 4).
Picture 4 – Distance blocks to avoid damages to the rope
or chain
Examples of protection of sharp corners
and edges
- Italkrane s.r.l 1
- YOYO CHAIN HOIST 1
- Italkrane 2
- STORAGE 5
- FUNCTIONING AND INTENDED USE 5
- GENERAL SAFETY RULES 6
- WORKING LIMITS 8
- RULES AND REGULATIONS 11
- SAFETY SIGNS 12
- IMPROPER USE 14
- RUNNING CHECKS 15
- SPECIAL EXECUTION 17
- 7 - Head 23
- ITALKRANE 24
- PRE ERECTION VERIFICATION 27
- “YOYO” ELECTRIC CHAIN HOISTS 31
- 1 speed 35
- 2 speeds 35
- TRAVELING 35
- LUBRICANTS 37
- QUANTITY OF LUBRICANT 37
- TYPES OF LUBRICANT 37
- Bankverbirdungerr 41
- Raiffeiserilandeseank 41
- WORKING CHECKS 42
- MAINTENANCE 43
- QUALIFICATION OF SERVICEMEN 44
- Daily Monthly Annual 49
- OPERATIONS TO BE PERFORMED 50
- BREAKDOWN 55
- DIRECT CURRENT FEEDING 59
- 60
- CHIEF SYMBOLS 66
- SLING CAPACITY 67
- (voltage drop 5% - COS 70
- NAMEPLATES 71
- CHECK REGISTER 77
- TABLE OF CONTENTS 78
Související produkty a manuály pro Sítě YoYo BE5
Sítě YoYo BE5 Uživatelský manuál
(2 stránky)
(2 stránky)
Finisar FTLF1523P1BTL podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Sieciowe moduły nadawczo-odbiorcze Finisar FTLF1523P1BTL.
Dostarczamy 1 pdf podręczników Finisar FTLF1523P1BTL do pobrania za darmo według typów dokumentów: Arkusz Danych
Komentáře k této Příručce